Epoxy Resin Ashtray Silicone Molds with Diamond Base Square and Round 2-Bundle Large Size 4inch

Dimension approximate:Square mold 4x4x1.25inch, diamond base 3.35x3.35inch Circle mold 4.27x4.27x1.32inch, diamond base 3.31x3.31inchMold color: clearFinish: gloss (may require polish/glaze if need a shiniest/most glossy look)Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit Can be used with dishwasher/oven/refrigeratorFood grade, no BPA/PVC/phthalate Wash and boil before use, especially for foodMore Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

• Ashtray casting kits include 2 ashtray molds (each with 4 slots), 2 geode crystal druzy texture mats, 1 fixed wooden frames. All are reusable. Make crystal growing effect storage box, led ash tray, cigarette holder, soap or candle dish, flower pot, succulent planter, jewelry container, table decoration and more.
• Make crystal growing effect storage box, led ash tray, cigarette holder, soap or candle dish, flower pot, succulent planter, jewelry container, table decoration and more
• DIY cigar ashtray can keep cigarette butts under control and always keep your home and office clean. It can store up to 4 cigars at a time. An essential accessory for every smoker,also perfect gifts for lover or friends
• Mainly use with modelling clay(air clay, paper clay, resin clay, polyclay, salt clay, metal clay, liquid clay, wood clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, cold porcelain, mix media and more
• Tips:after pouring epoxy resin to ashtray mold, gently place the diamond base mold in middle. Demold when it is cured. Then you will receive an ashtray with diamond pattern printed on the bottom
• Durable soft mold. Transparent that you can check the bottom when process project. Easy to demold, gloss finish
• Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc